The correct way to use car wash mud? How can it not destroy the car?
To clean the dirt on the surface, first clean the dirt on the surface of the car paint with clean water or with car fluid.
Soak the car wash mud in warm water. Before using the car wash mud, it must be soaked in warm water, then take it out and place it on the part to be cleaned, and flatten it with the palm of the hand. A good car wash mud will not stick to your hands. The cleaning effect is not good.
Wipe gently. Lightly wipe the paint surface, not too hard, otherwise it will easily rub the mud particles onto the surface. If you do not hold it firmly during the scrubbing process and fall to the ground, you should replace it with a new car wash mud, because some sand will be stained on the ground. Particles, continued use will scratch the body paint.
Wipe while spraying water. Wipe while spraying water, rubbing repeatedly to remove stains. After use, it must be cleaned and kneaded into a dough, put in a plastic bag, sealed and stored.
Use with car wash wax. Use with car wash wax, so that it will not damage the paint, avoid dry rubbing, and make it more lubricated. After scrubbing, waxing is applied to form a protective film, and the car body will look newer and smoother.
Use clean car wash mud. After wiping, the surface of the car wash mud becomes dirty due to the adsorption of dirt. At this time, the car wash mud should be flattened, the dirty surface should be rubbed into the inside, and then rubbed with the clean side, otherwise it will get dirty and even rub the topcoat.
100g/150g/180g/200g/50g Car Cleaning Clay Bar Auto Detailing Mud Handheld Washer