How do you safely remove destructive pollutants from the finish of your car, unlock the full gloss in your paint, and get the best value?
It has a 100% ergonomic design, and it is characterized by a soft high-density foam material. Restore your paint by removing harmful contaminants
Provides a few minutes instead of hours of car wash mud, each replaceable pad can reach up to 20 cars, saving you time, money and trouble
Instructions and methods for use.
Detailed description: Before use, the low temperature may harden the pad and warm the surface of the pad. Soak in warm water for 30-60 seconds, then start using. Do not use clay on surfaces below 50 degrees Fahrenheit or above 144 degrees Fahrenheit.
1. It can be used with water mill mud, it is not recommended to use other liquid agents, which will greatly affect the life of the mud pan and cause degumming
2. The product is not recommended to use the machine (it can also be used), because every operator has different habits, including the machine turning too fast, the paint surface is too dry, the operation will pull, and the pursuit of quick liquids, etc. May lead to shortened product life
3. Do not dry and grind the mud, and be sure to wipe it with a large amount of water. It is not recommended to operate on a high-temperature surface or under the sun.
4. Please remove the sand and dust of the car paint before use to avoid scratching the car paint when grinding. If there are swirling patterns, you can use the mirror to polish again.
5. After use, rinse with water and dry, and store in a cool place.
6. It cannot be used for 220V power polishing machine. The product needs to be sprayed with water. Water will cause the polishing machine to short-circuit.
7. If there are threads after grinding mud due to some factors, just treat it with a mirror or wax it
Clay Sponge Block Car Wax Clean Foam Shampoo Tools Remove Cement
